Error Codes 10060 and 10061

10060 - Not connecting to stream host

  • Is the IP address prefixed with http:
  • If so, please remove that.
  • Are outgoing connections allowed by the SAM computer?Look at your encoder configuration. Under "Server Details", make sure you have included only the IP# or domain name of your SHOUTcast server. If you have entered http://, please remove it. (i.e. you should have something similar to cp1.digistream.info - without the http:// in the beginning)
Open your encoder for the server. Where you entered your server address/IP, is there "http://"? If yes, remove it. This field should have only the server address/IP WITHOUT the http:// .
 
Is the Ip Address Prefixed with http:// -- in your Encoder Config, under "Server Details" make sure you only have the IP Address of your server, in other words, if your using a dns you want to enter purple.neostreams.info (no http://) , if your using an ip address you want to enter 192.168.1.150 (no http://)

On occasion, when changing the details of an already established encoder, SAM Broadcaster may try to use the old server details in conbination with your new one.  A good rule of thumb is to delete the encoder with the old information, and creating a new encoder for each SHOUTcast server you will be using

 

10061 - You can't connect/Stream Offline

  • This is a connect error code, not all that unusual for Audiorealm and Spacialnet
  • 10060 and 10061 are problems with the server being down, connection refused, bad password, bad IP, or bad gateway.
  • Please verify:
    1) Is the DNAS is running - put the server address into a web browser, do you see the DNAS page?
    2) Is the password you have is correct (verify by logging into the DNAS admin)
    3) The DNAS is not already sourced - is someone else connected to the server?  Put the server address into a web browser, is someone else already streaming?
    4) The encoder has no http:// or other protocol prefix. Your server details for encoder should not include http://
    5) Outgoing connections from SAM to the server are allowed. Make sure SAM is able to access teh internet
 
If you're getting error 10061, log onto your web based control panel and verify that your server is on.  You're always able to start/stop/manage your server using our Web-Based Control Panel.

Open your stream URL in a web browser and verify that your server is up and running. If the server status indicates that "Server is currently down", that simply means no one is currently using the server to stream music.  However, if your page indicates "Page not found", then your server is indeed offline.  Simply log into your web-based control panel and turn it on or contact your shoutcast provider and ask for assistance in restarting your server.

Updated: Aug. 28, 2007

  • 55 användare blev hjälpta av detta svar
Hjälpte svaret dig?

Relaterade artiklar

SAM Error: Unable to send data fast enough, clearing cache

To put it mildly, this error indicates that "YOU" cannot send data fast enough to the target...

Error Code 11004

11004 - Connection Failed (11004: 500 No Data (winsock error #11004)) Check your cables or...

Error: Disconnecting Gracefully

If you get disconnected from the server, or are unable to connect, and you see message about...

Error Code 200

Error Code 200While the SAM Wikipedia indicates:"200 - requests - Touch OK Like it said,...

SAM Error Codes (From the old SAM Wikipedia)

0 0 - Retrieving XML document Error (0) Most likely it is coming from your stream host. Try...